PE Insulated, 0.5mm2 (1 X 0.8mm)

MULTIPAIR, PE INSULATED, INDIVIDUALLY SCREENED ARMOURED CABLE

Size

0.5 Mm2 ( 1 X 0.8 Mm ) Class 1 SOLID

Specification	:	Generally to BS 5308 part-1

Conductor	:	Annealed bare/tinned solid copper, class-1 to IEC 60228 & BS 6360
Insulation (see note)	:	PE type L/MD to BS 7878
Pairing	:	Two insulated conductors twisted together to form a pair
Assembly	:	in concentric layers
Screen	:	each pair is individually screened with aluminum bonded to polyester tape + tinned copper drain wire
Overall Screen	:	(when required) aluminum bonded to polyester tape + tinned copper drain wire
Bedding(see note)	:	extruded PVC type TM1
Armouring(see note)	:	galvanized steel wire (GSW)
Jacket (see note)	:	overall PVC type TM1 to BS 7655

Test Voltage	:	1000Vac - 1 min.
Rated Voltage	:	300/500 V
Rated Temperature	:	70 Degree C
Min. Insulation Resistance	:	at 20⁰C : core to core = 5G ohm.km, screen to screen = 1M Ohm.km
Max. Mutual Capacitance	:	at 1kHz : 115 pF/m
Conductor Resistance	:	refer to technical section

Note : Optional 90-Degree / 105-Degree / FR / LS0H

Item Code for screened : EA8Z2V --x 2 x 0.5 U For unscreened : EA8A7Z2V - x 2 x 0.5 U (* For Tinned Cu, add 'T' after conductor size)